When Your Water Heater Quits: Immediate Action Plan
When Your Water Heater Quits: Immediate Action Plan
Blog Article
Just about everyone may have their own opinion with regards to Hot Water Heater Repair.
Several modern-day houses utilize an electric water heater for their heating system, as a result of its convenience and also simplicity of use. Nevertheless, much like any other electric home appliances, problems might emerge with its usage, all of a sudden. It can be really irritating to awaken to a cool shower as opposed to a hot one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, water heater issues can be fairly stressful. Thankfully, we have actually made a list of feasible options to your water heater concerns. There are a number of factors that might cause many of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the issue is, getting it fixed ought to not position way too much of an issue if you adhere to these actions:
Call A Professional:
If after changing all defective components and also resetting your temperature, the hot water heater still isn't working, you might require to get in touch with a specialist plumber for an expert point of view. The problem with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water required in your home. Whatever the situation might be, an expert plumber would certainly help fix the trouble.
Check Your Power Supply:
As fundamental as this might seem, it is extremely essential. Without appropriate power, your hot water heater will not work. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, merely turn it off and on once more. Replace any kind of broken or worn-out fuse. Examine the device with power after these changes to see if it's currently functioning.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may require to inspect the temperature level settings on your upper thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open up the access panel as well as press the red switch for temperature level reset over the thermostat. This should help heat up the water. Turn the circuit breaker back on as well as inspect if the issue has actually been dealt with.
Inspect the Burner in the Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any one of them. If any of them is defective, replace that part and then check whether the warm water is back on.
Final thought
Hot water heater troubles are not always significant. Many of them are due to small concerns like a blown fuse or damaged burner. Replacing the damaged components need to suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you enjoyed our topic about Hot Water Heater Repair. Thanks a ton for spending some time to browse our post. Sharing is good. You never know, you may just be doing someone a favor. Thanks a lot for going through it.
Plumbing care available. Report this page